During the operation of the Board to Board Connector, in order to ensure its safety, efficiency and long life, the following safety operation matters need to be paid attention to:
1. Cleaning and maintenance
Keep the equipment clean: During any installation, adjustment and maintenance process, ensure that the equipment and its surrounding environment are free of dust, dirt and other dirt accumulation. This helps to ensure the normal operation of the connector and also helps to protect the surface and parts of the equipment.
Regular maintenance: Regularly maintain the connector, such as cleaning dust and debris, to avoid affecting the performance and use of the connector and causing failures.
2. Avoid external forces and impacts
Avoid shock and vibration: When installing and using the Board to Board Connector, external force shock and vibration should be avoided as much as possible. This may cause the connector to loosen or damage, reduce its safety performance, and expose the circuit board to the risk of various circuit errors.
Stable installation: The connector should be placed on a stable and flat surface and installed and fixed to avoid accidental impact.
3. Correct operation
Read the instruction manual: Before installing the BtB connector, carefully read the device's instruction manual and technical manual to ensure that the correct plug-in and unplug sequence is met during installation.
Correct plugging and unplugging: During the plugging and unplugging process, make sure to slide the connector easily instead of hitting, pulling or rotating the connector pins. Excessive force may cause the pins to break or the internal end pins to wear, thereby reducing the service life.
Prevent excessive bending: Avoid excessive bending of connector pins, which may cause the pins to break. If the connector extension is too short, an extension claw should be used to prevent excessive bending of the pins.
4. Anti-static treatment
Pay attention to electrical static electricity: Before using the Board to Board Connector, the staff must pay attention to the possibility of electrical static electricity. Static electricity can cause voltage spikes and cause permanent damage to connectors and other electronic devices.
Use anti-static gloves: Before inserting the connector, apply suitable anti-static gloves to ensure that the anti-static treatment procedures are followed.
In summary, following the above safety operating precautions can ensure the safe, efficient and long-life use of the Board to Board Connector.
